HPE Networking CW 2150 16p 10M/100M/1G PoE+ 4p SFP+ 1G/10G 248W Switch

SKU
S6X55A
Login for pricing
In Stock: 5 available
Networking CW 2150 16p 10M/100M/1G PoE+ 4p SFP+ 1G/10G 248W Switch
More Information
SKU S6X55A
Manufacturer HPE
Availability In Stock

Enterprise-class secure and reliable connectivity

The HPE Networking CW 2150 Switch Series delivers up to 176 Gbps of nonblocking bandwidth and up to 131 Mpps forwarding, with nine unit IRF stacking for resilient availability and link redundancy.
The CW 2150 series offers flexible connectivity with four 1G/10G SFP+ uplinks on the 16, 24, and 48 port models, and two 1G SFP plus two 1G/10G SFP+ uplinks on the 8 port model. The 24 port model adds four SFP combo ports.
Advanced Quality of Service (QoS), Internet Protocol version 6 (IPv6) and dynamic L3 protocols (RIP and OSPF) for reliable connectivity
It supports IEEE 802.3az Energy Efficient Ethernet and offers a fanless design on the 8‐, 24‐, and 48‐port non‐PoE models.
Built‐in 6 kV service‐port surge protection helps reduce the risk of power strikes in demanding environments such as construction sites.

Powerful PoE capabilities

The HPE Networking CW 2150 Switch Series provides 125 W, 248 W, 405 W, 390 W, and 770 W Class 4 PoE across the 8‐, 16‐, 24‐, and 48‐port models.
It supports advanced PoE features, including fast PoE that delivers power within seconds of system startup.
Perpetual PoE supports end‐device state monitoring to help maintain power during a power‐source reboot.
The PoE Watchdog function automatically removes power from a port when the connected device is no longer active.

Comprehensive security control

The HPE Networking CW 2150 Switch Series provides security features and network management for modern SMB environments. Secure boot verifies digital signatures to help prevent unauthorized or malicious software from loading at startup.
With HPE IMC, the CW 2150 series supports EAD by integrating terminal‐security policies, network‐access control, and access‐rights enforcement into a unified security framework.
It delivers multi‐layer access protection with granular ACLs (IPv4/IPv6, VLAN, port‐based), identity‐driven policies, and authentication options including 802.1X, MAC, Web, RADIUS, TACACS+, plus Guest VLAN detection and dual‐NIC detection with IMC.
The CW 2150 series provides encrypted access using SSHv2, SSL, SNMPv3, and TLS, along with role‐based privileges and audit logging.
Threat‐prevention features include Control Plane Policing (DoS protection), ARP and DHCP protection, ICMP throttling, port security, and source‐port filtering.

Simple and flexible management

The HPE Networking CW 2150 Switch Series offers Web GUI, industry‐standard CLI management and can be managed with other CW switches through a built-in dashboard for simplified deployment and centralized management.
Advanced management options include HPE Intelligent Management Center (IMC), HPE Networking Management Software (AirWave), SNMP managers, and REST APIs for integration with existing customer dashboards.

HPE Networking CW 2150 Switch Series empowers your business with reliable, high-performance networking tailored for small and medium-sized businesses and branch offices. These fully managed, stackable Layer 3 switches deliver enterprise-grade features without the complexity or high cost. With CW 2150 series, you get seamless management, robust security, and flexibility to scale as your needs grow. Designed for today’s evolving networks, these switches provide affordable excellence—enabling you to connect and protect your business with confidence. Upgrade to the CW 2150 series and experience secure, simple, and powerful networking for your organization.

What is new supporting point:
Enterprise-class, fully managed, stackable Layer 3 switch series with 8‐, 16‐, 24‐, and 48‐port Class 4 PoE and non‐PoE models, four 1G/10G SFP+ uplinks, and up to 770W of Class 4 PoE
Up to 176 Gbps in nonblocking bandwidth, 130 Mpps in forwarding, and up to 9‐switch IRF stack
Flexible connectivity options with four 1G/10G SFP+ uplinks in the 16‐, 24‐, and 48‐port models and two 1G SFP and two 1G/10G SFP+ uplinks in the 8‐port model
Advanced Quality of Service (QoS), IPv6, and dynamic L3 protocols (RIP and OSPF) for reliable connectivity
Fanless design in the 8‐port and 24‐/48‐port non‐PoE models. Supports IEEE 802.3az standard for Energy Efficient Ethernet (EEE)
Managed by Web GUI, CLI, Smart Management Center (SmartMC) web dashboard, HPE Intelligent Management Center (IMC), SNMP, and REST APIs
Management features
Switch typeManaged
Data transmission
Switching capacity112 Gbit/s
Throughput83 Mpps
Design
StackableYes
Performance
Physical stacking (units)9
Processor frequency1200 MHz
Internal memory512 MB
Built-in processorYes
StackableYes
Power
AC input voltage100 - 240 V
Power consumption noteIdle: 25W Typical: 38W Full load: 317W (PoE 248W)
Power supply noteFixed, 90–264V, single AC
Power over Ethernet (PoE)
Power over Ethernet (PoE)Yes
Total Power over Ethernet (PoE) budget248 W
Other features
Latency1 GE: < 5μs 10 GE: < 3μs (64-byte packets)
Performance managementWeb GUI Command Line Interface (CLI) Smart Management Center (SmartMC) HPE Intelligence Management Center (IMC) HPE Networking Management Software (AirWave) REST API SNMP
Memory and processorCPU: Dual-core Arm at 1.2 GHz Flash: 512 MB SDRAM: 1 GB
Fan1
Weight (imperial)4.6 kg (10.1 lbs)
I/O ports16 x 10/100/1000BASE-T PoE+ ports 4 x 1/10GBASE-X SFP+ ports 1 x RJ-45 console, 1 x USB Type-C console, 1 x USB and 1 x OOBM management
Dimensions (W x D x H) (imperial)380 x 549.9 x 133.1 mm (15 x 21.6 x 5.24")
Operational conditions
Operating temperature (T-T)-5 - 50 °C
Heat dissipation1982 BTU/h
Weight & dimensions
Width380 mm
Depth549.9 mm
Height133.1 mm
Weight4.6 kg

You may also be interested in

Compare Products
Product HPE Networking CW 2150 16p 10M/100M/1G PoE+ 4p SFP+ 1G/10G 248W Switch
New
HPE Networking CW 2150 16p 10M/100M/1G... Login for pricing
Cisco Catalyst 1200-48T-4G Smart Switch, 48 Port GE, 4x1GE SFP, Limited Lifetime Protection (C1200-48T-4G) Cisco Catalyst 1200-48T-4G Smart Switc... Login for pricing
Cisco Catalyst 1300-16FP-2G Managed Switch, 16 Port GE, Full PoE, 2x1GE SFP, Limited Lifetime Protection (C1300-16FP-2G) Cisco Catalyst 1300-16FP-2G Managed Sw... Login for pricing
Cisco Catalyst 1200-24P-4G Smart Switch, 24 Port GE, PoE, 4x1GE SFP, Limited Lifetime Protection (C1200-24P-4G)
Bestseller
Cisco Catalyst 1200-24P-4G Smart Switc... Login for pricing
HPE Aruba Networking Aruba Instant On 1960 48G 40p Class4 8p Class6 PoE 2XGT 2SFP+ 600W Managed L2+ Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) 1U White HPE Aruba Networking Aruba Instant On... Login for pricing
Cisco Catalyst 1300-16P-4X Managed Switch, 16 Port GE, PoE, 4x10GE SFP+, Limited Lifetime Protection (C1300-16P-4X) Cisco Catalyst 1300-16P-4X Managed Swi... Login for pricing
SKU
S6X55A
C1200-48T-4G
C1300-16FP-2G
C1200-24P-4G
JL809A#ABG
C1300-16P-4X
Manufacturer
HPE
Cisco
Cisco
Cisco
HPE
Cisco
Rack mounting
N/A
N/A
N/A
Y
Y
N/A
Power over Ethernet (PoE)
Y
N/A
N/A
Y
Y
N/A
Stackable
Y
N/A
N/A
N/A
Y
N/A
Switch type
Managed
Managed
Managed
Managed
Managed
Managed
Basic switching RJ-45 Ethernet ports type
N/A
Gigabit Ethernet (10/100/1000)
Gigabit Ethernet (10/100/1000)
Gigabit Ethernet (10/100/1000)
Gigabit Ethernet (10/100/1000)
Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity
N/A
48
16
28
48
16